Sunday, 9 June 2013

SSC Junior Engineer JE Exam Expected Cutoff Marks 2015 Result Date

After a postponement of SSC Junior Exam to different different dates final staff selection conducted a common written examination for the recruitment of Junior Engineer Civil ,  and Junior Engineer Electrical in Central Public Works Department CPWD and Department of  Posts, JE CIVIL, JE ELECTRICAL & MECHANICAL, JE Quantity Surveying & Contract in Military Engineering Service MES, JE CIVIL & MECHANICAL in Central Water Commission CWC and Farakka Barrage. More then one lakh candidates participated in this examination. Due to large no of vacancy this year candidates filled application form on a large scale.
First of SSC today conducted Paper 1 for the recruitment of Junior Engineer. evaluation of Paper 2 of Civil Engineering and evaluation of paper 2 of Electrical/Mechanical Engineering will depend on the  on the paper 1 cut off marks 2013 fixed by the SSC, following by category wise. That why we brought previous year cutoff marks for for SSC JE paper 1.  we hope this will be useful for you for analyzing the expected cutoff marks .
SSC previous year cutoff marks is based on the data of SSC Results http://ssc.nic.in/press-release/JE%20-%2012%20(WRITE%20UP).pdf


Previous year SSC Junior Engineer Exam 8 April 2012 Paper 1 Cutoff

CIVIL ENGINEERING
ELECTRICAL/MECH
SC
47.75
75.50
ST
43.50
66.50
OBC
52.50
81.50
Obc minority
49.25
78.50
Oh
30.00
60.25
HH
30.00
30.00
UR un reserved General
62.25
90.50
Total Candidates
5025
1986



Expected Cutoff Marks for SSC Junior Engineer Exam  9 June 2013
SC
50~60
70~80
ST
40~45
60~70
OBC
50~60
80~85
OBC minority
50~55
80~85
OH
30~35
65~70
HH
35~40
30~35
Un Reserved
70~80
100~110




Expected cutoff marks are totally based on the assumption of the candidates who participated in SSC JE exam 9 June 2013. What do you think what will be expected cutoff marks for this year ? How many questions you have attempted correctly please inform us ? it would be helpful for us for analyzing the most accurate cutoff marks for this year.
We are going to upload provisional Answer key / answer sheet here so keep on checking here .
Results dates will be informed here when it will be announce by ssc officially.

437 comments:

«Oldest   ‹Older   1 – 200 of 437   Newer›   Newest»
muskan said...

above cutoff is right ..but i think cutoff for general cutoff will be high because paper was so easy ,, i attempted 99 question correctly on the basis of your answer key ,,

Anonymous said...

by what date is the result going to get declared?

Anonymous said...

sir plz give some idea regarding paper 2 marks last year

Anonymous said...

Paper 1 + 2 cutoff total marks.....???

Anonymous said...

paper was not dat easy as stated above by many..attempted 150 expecting 95..

Anonymous said...

@Muskan Where is the answerkey ?

Anonymous said...

Where u hv chekd tht?

Anonymous said...

Cutoff will not be more than 90-95 marks...as this is always the case...and also cutoff will be based on number of candidates that have given the exam...as per my experience cutoff will not be above 95/200 for objective papet

orooj said...

rightly said ...not more than 95..

Anonymous said...

paper 2 ka qualifying batao yaar koi?

Anonymous said...

sir mujhe ssc je mechnaical ki answer key de do amitg446@gmail.com

Anonymous said...

mujhe v btao kha ha anwser key

Anonymous said...

Cut off will be less than 95 marks for mech/elect

Amar singh said...

Sir, mail me the answer ker
amarsingh0242@gmail.com

Anonymous said...

paper-2 cutoff(gen) was 139 last year for mech/elec

Anonymous said...

what is the expected cutoff of paper -2 civil....many are saying paper was easy, but i think it was too lengthy, dat no one can do it in 2 hrs, also numericals of RCC and survey was above the level of this exam as dose were from IES....please anyone tell me the expected cutoff of paper -2 civil...and also anwer keys of paper -I.

Anonymous said...

second paper was not expected ones.

Anonymous said...

yes, most of us who had given the exam, thinks the same for paper-2 civil, was expected one,....hoping cutoff of paper -2 less than last year....but want to know the view of others also....please share ur experience....

Mohammad Zaheen khan said...

sir pls mail me answer key of ssc je 2013

Mohammad Zaheen khan said...

sir pls mail me the answer key of ssc je 2013
mohammadzaheenkhan@gmail.com

GYANENDU SHEIKHAR TRIPATHI said...

sir pls mail me the answer key of ssc je 2013
gyantripathi.90@gmail.com

manoj said...

mere first paper me 105 obc EE me ban rhe h kya koi chance h kya dosto

Anonymous said...

plz mail me the answer key for mechanical at sushilkumar.1489@gmail.com

Anonymous said...

Mech/ elect share ur expected marks for paper 2 nd expected cut off marks for paper 2

akash said...

dear sir, please mail me answer key for electrical engg.my booklet no is 888KO9
aakashnigama@gmail.com

subhash said...

please send me the answer key of ssc je key for electrical at subhashdevineni@gmail.com

BRAJESH KUMAR said...

Sir, mail me the answer ker (civil) brajeshkumar101165@gmail.com

MANOJ NANBAN said...

pls send the civil answer keys.. manojnanban149@gmail.com

Anonymous said...

sir pls send electrical key to rajkamrohmoh@yahoo.com

Anonymous said...

Sir maine obc category se 114 que attempt kiye jisme mere 92 sahi hai kya koi chance hai

Anonymous said...

Regarding ME Paper 2: paper was lengthy not many candidates have attempted 75% of the paper...also..for this year's paper 2 cutoff will be less than as that of last year's I.e., 139/300..rest depends on number of candidates who qualifies for paper 2...

Anonymous said...

EE GUYS WAT DID U EXPECT IN PAPER 2 AS IT WAS NOT LIKE PREVIOUS YR.

Anonymous said...

Getting around 120-130 marks in paper 2 mech.....any hope for selection???

Anonymous said...

How much paper 2 have you attempted in ME

Pushpendra dhurwe said...

pls mail me the answer key of electrical if any body has.....dharmeshdhurwe25@gmail.com

Anonymous said...

Around 220 nd u

bhanu gs said...

send me mechanical answer key plz sir to my mail gsbhanu340@gmail.com

Anonymous said...

I've attempted for 180 marks..what about ur objective paper ?? How many ques attempt ed ?

Anonymous said...

expected cuoff paper 2 civil would be arond 40.

mohit said...

Attempted 150.... expecting around 110 ... I had cleared paper 1 in last year also..but could not clear paper 2

Anonymous said...

sir, when the result is going to be declared?

rahul arya said...

sir please send me the answer key of ssc je mechanical paper 1 pls ....to my id
rahul96arya@gmail.com

rahul arya said...

sir pls send ssc mechanical je answer key to my id
rahul96arya@gmail.com

rahul arya said...

anyone please send me the ssc je mechanical answer key..
on my id rahul96arya@gmail.com

Anonymous said...

sir, please send me the ssc je 2013 key (mech)to chinnodu337@gmail.com

Anonymous said...

Please send me the ans key of mech paper on vikas_bhrdwaj@yahoo.com

Vikash said...

I have solved questions for 160 marks correctly in paper2.what will i secure after copy check?

Anonymous said...

What is your set order, A,B,C or D?

Anonymous said...

@vikash. I think around 110-120

Anonymous said...

Sir plz send me answer key of ssc je mechanical on my mail Malik.rameez.88@gmail.com
n i have attempted around 210-220 marks paper 2 in paper 1 i think i ve around 120 marks in obc category
what's ur view guys

Anonymous said...

there will be n e cuttoff for paper two?

Anonymous said...

I think u have very good chance...100% bcoz 120 is very good score...cut off will be around 85 for obc ...also last tym cut off for paper 2 was 99...have u cleared any psu written before?? What's ur GATE rank

Anonymous said...

anyone got the answer key on mail???if yes please tell because i want answer key too..

Anonymous said...

Booklet no BH2013

Sahil Arora said...

pls send me answer key of mechanical trade on my email

Anonymous said...

i had given exam for JE Civil in OBC category, as per answers i had checked i am getting around 85 marks in paper-I and i had attempeted 130 marks in paper-2, out of which 110 marks is absolutely correct and 20 marks are partially.....Is there any chance for me????please suggest.

Anonymous said...

can u send me the answer keys for civil set A.....at rajneesh_hcst@yahoo.co.in

Anonymous said...

Last year in ssc je exam for civil..paper 2 cutoff for obc was 54/300...this time if you're getting your stated marks...then you'll definitely get thru this time

Mohammed Riyas said...

pls send me answer key of mechanical trade on my email
mohammedriyas2014@gmail.com

Anonymous said...

I think cut off for je civil paper 1 are
Sc 60-70
St 55-65
Obc 70-80
Open 80-90

Then for paper 2 are
Sc 50-60
St 45-55
Obc 60-70
Open 70-80

Best of luck .

Anonymous said...

Sir, i want to know that is there step marking for paper 2 in mech. Also tell me at what grand score sc candidate can confirm there selection in je mech. Kindly reply sir.

Anonymous said...

Sir, tell me. Cwc and mes me se kiski cut off high rhti hai.

Anonymous said...

CWC cutoff will be high

Anonymous said...

Last year's cutoff in mech paper 2 for sc candidates was 79/300 for the interview call

Anonymous said...

How much paper should be attempted in mech paper2 in order to get atleast 45% marks

Anonymous said...

hi frnds...
I am from mechanical n scoring 100+ in paper I & 130+ in paper II. I am obc candidate.
Here is detail of cut off marks(mech)-
Paper I
Ur 100-105
Obc 90-95
Sc 80+
Paper II
You have to score atleast 120+ in all category to stay alive in competition.
cut off marks of various dept.
Cpwd>mes>cwc
Final cut off marks for appointment in mech:
Ur 283+
Obc 274+
Sc 260+


Anonymous said...

this yr final cut off will be 250+ in electrical

mohit said...

I think 105 is too high....it should be near 95 ...what's ur attempt in paper 2

Anonymous said...

Pls give me details about the no. Of post in 2012and2013 for ssc je mech. Kya is bar vacancy zyada hai?

Anonymous said...

Sir,please tell me, kya ssc je paper ke sets region ke according alag-alag bnte hai. Agar bnte hai to kya unme puche gye questions bhi alag hote hai. I mean to say that sscnr me jo ques paper tha kya wo other region se alag tha.

Anonymous said...

105 in paper 1 !!
electrical ke bahut kam honge
105 cant be as combined cut off is there for ele/mec

Anonymous said...

The guy who is getting 130+ in mech paper2...how much paper you had attempted ???

mohit said...

Even in mech there will be atmost 500 candidates...so 105 cut off is difficult....@anonymous yar sabhi regions/ka paper same rehta hai...bus sets main questions shuffle hote hai....
I think this tym vacancy will be more bcoz last tym around 100 vacancies were unfilled...also dis/tym exam is delayed by 2 months

mohit said...

Yar electrical ka paper 2 kaisa tha??? What can be cut off (considering only top 200 elect students)

Anonymous said...

SSC is taking too much time in uploading the ans keys..

Raju said...

If the no. of vacancies remain same as that of last year final cutoff for civil may end up a bit on lower side due to conventional paper being comparatively lengthier and a little tougher as well.

Anonymous said...

@raju...yes i agree with u....as i was preparing for ssc je civil...and had seen last four years papers...paper -2 of 2013 was not only lengthier but was also little tough as pattern was changed...i dont know how SSC's people think that such a lengthy paper can be solved in 2hrs...if this paper was of 3 hrs...than can be considered not typical...but as the time was less and 50% paper was theoretical...i m also hoping for lower cut off this time....but main point of concern is that this year no. of candidates are approx. 3 times of last year...so nything can happen in final result...just hoping positively...

Anonymous said...

@mohit
electrical paper 2 had moderate Question
i have done 180 numbers correctly
lets see how much can i get
paper 2 in comparison to previous yr had tougher question.
some question were like asked in conventional IES.Also Hysteresis and hard soft magnet is from eng materials which not in thier syllabus.

Anonymous said...

where is the answer keys ? yaar kaise aaplog marks expect kar rahe ho bhai.

Anonymous said...

Why SSC is not declaring answer key??
Why they are delaying it?

Anonymous said...

How many students had given the exam of je civil,

Among the 32000?
And I want to know how many are the vacancy for je civil?

Anonymous said...

I check my paper,i think I got 80 marks in paper first of civil,
In second near about 60.

Is there any chances of being selected ??
I am from sc caste.
Please reply.....

Anonymous said...

Sir im preparing for civil services n i didn't went fr gate exam
this is first engg competitive exam i ve appeared
but i hope i ll be good

Anonymous said...

hey guys:...
paper-I 105+
Paper-II I have attemptd 250 marks paper
And 200 marks qus are absolutely correct . I have attmptd 3 numerical corrctly. I m sayng that cut off wil b high bcz my 3 frnds are gttng 95 + marks in me.

Anonymous said...

attmptd 250 marks paper

Anonymous said...

ssc should upload the answer key on their official website as soon as possible

Anonymous said...

IN MECH CUT OFF WILL NOT BE MORE THAN 90 THIS TIME ALSO.PAPER 2 WAS BIT LENGTHY SO CUT OFF WILL BE AROUND 135.

Anonymous said...

You are a genius man...you've attempted 250 marks paper 2....

Anonymous said...

No doubt that paper2 in mech was lengthy...but considering last year's mech paper2 I don't think that cutoff for paper will be 135...it should be lower than that...by the way...my friend..how much paper2 you've attempted in mech

Anonymous said...

I am getting only (105+130) marks in OBC for mech.Is there chance for me to go interview round? & if 'YES' then How much i have to secure in interview to get job?

Anonymous said...

Yaar maine 180+ paper1 & 290+ paper2 me kiya wo bhi correct kyuki main genius hoon. IS THERE ANY CHANCE TO get REJECT?

mohit said...

Hi guys pls use name...and obc guys cut off for paper 2 can not be more than 110 though last year it was 99....for gen it may be around 130-140. I have also attempted 220 marks paper..but even then its difficult to get 130 marks as u never gets full marks for theory questions

Anonymous said...

There is no chance for gettinh rejected...you'll get selected..if you are getting that much marks...by saying genius I mean that mech paper 2 was very much lengthy..very few were able to get that done for that much marks..

Anonymous said...

hey if u r getting 105+130 then u hv to score atleast 45 marks for obc n 50 for ur.

Anonymous said...

Sir what is the cutoff marks of paper 2 mechanical??my mail id pranab852003@yahoo.co.in

Anonymous said...

Yeh s_ _ la bakwas kar raha hai.180+,290+ Ha ha ha.tujhe to BHARAT ratna milna chahiye

Anonymous said...

inke liye bharat ratna bhi choti cheez hai
NOBLE AWARD milna chahiye

Anonymous said...

100 -110 , i dont think that cut off wiil be so high because cut off for previous year was just 90 and nnumber of question 150 . so technically cut off should be less than 90.

Anonymous said...

cut off for mech gen will not be more than 90.

Anonymous said...

has anybody from mech done this questions/
1)a steel bar is fixed at both ends.if it is heated the stress induced will be.
2)which milling process has better surface finish?

mohit said...

Tensile stresses will induce....don't knw 2nd...but I think I opted for face milling as it is finishing operation

Anonymous said...

for (1) compressive stress &for(2) down milling

Anonymous said...

SSC walo ,,
So gaye kya???
20 din ho gaye abhi tak answer key bhi upload nahi ki.

Anonymous said...

Yes ..
Staff selection co,mission is in the deep sleep.
They don't remembered to upload the answer key..

Anonymous said...

They should upload it within 2 to 3 days..
This is confirmed news.
So be ready boys and girls.
And best of luck..

Anonymous said...

Down or climb milling will be the ans..although 2 correct options are given...both are correct

naveen said...

not tensile stress....its answer compressive stress and 100% true and i think scnd ans is face milling.

Anonymous said...

1st tensile strength
n 2nd i think conventional

mohit said...

M 100% sure ans should be tensile stresses.. when steel is heated it will try to expand ,since its ends are fixed..tensile stress will induce...if it were free to expand den dere would be no stresses

Rajesh Mandala said...

plz send me je2013answer key for mechanical.

vikas said...

stress induced will be compressive bcz both end of steel bar is fixed

naveen said...

its comressive strees when temp increased and tensile when temp decreased.
Reference: made easy notes,
R. S. Khurmi (strength of material) page no 76
Topic 5.4 thermal stresses in bars of varying section

mohit said...

@naveen yes u r right....i also checked ...

Anonymous said...

Yr ssc key kab upload karegi bc
if anybody had key of mech plz upload it
its request everybody

Anonymous said...

How many candidates were given this exam of je civil???
In my class out of 40 student there were only 8 was present to give both paper 1 and 2.

Anonymous said...

How many Vacancy's are there for civil?
And for mechanical and electrical.??
Anybody knows?
Please tell us.

Thanks in advance..

Anonymous said...

Hi friends...
My name is Anwi.
Can anybody tell me that how many vacancys for civil ?
Please tell if anyone knows.
From
Anwi(M.H)......

pappu said...

sir please send answer key of mechanical 2013 on this email- pappugiri@yahoo.co.in

Anonymous said...

Sir plz send answer key of mechanical 2013 on this email
Malik.rameez.88@gmail.com
its a request sir urgently plz

mohit said...

Everyone who is looking 4 answer key...,,answer key has not been uploaded yet and will be uploaded at official site www.ssc.nic.in ..so keep checking at dis site

mohit said...

@admin pls don't delete my earlier msg as it will be helpful to many candidates here

Anonymous said...

when will they upload answer key??????

keetarp atpug said...

hi , i m expecting 115 in 1 paper and approx 140 in 2 paper mech stream ,,, any chance of interview ?

mohit said...

@keerap yup ..u have very good chance...but i think u r at edge in paper 2...whats ur attemptation in paper 2

hiren said...

expectnig 85-90 in paper 1 and attempted 240 marks in paper 2. what r the chances? OBC Catagory.

hiren said...

i m from mech dept

Anonymous said...

Hi
sir I think i have approximately 120 marks in paper1 and i ve attempted around 200 marks in paper 2 in mechanical stream
I've obc category too
what's the chance dear
n how much ill get in paper 2 approx

mohit said...

U may get 120-130 marks..nd last year cut off was 99 for paper 2 in obc category

mohit said...

Going through comments I think dis tym cut off for paper 2 may be on higher side I.e 140-150 marks as many obc cand are clearing cut off for general category.....bad luck 4 me as I was expecting near about 130...

Anonymous said...

I think the cut off for electrical(general)is very high here given.it should around 90 ,i think.what do u think guys?

Anonymous said...

i think the cut off for electrical (general) is very high given here.i think it should be around 90.what do u think ?

Anonymous said...

Correct numerical=(85-90)% of full marks allotted for that question
best theory ans=(80-90)%
avg. Theory ans=(50-60)%
poor theory ans=(20-30)%
Now U all are able to calculate paper 2 marks

Anonymous said...

ANYONE ATTEMPTED THESE QUESTIONS FROM GK?
1)FLY ASH IS?
2)INJECTION OF WEAKENED MICROBES TO CONFER RESISTANCE AGAINST A DISEASE IS?
3)A CIVIL SERVANT IN INDIA CAN ENJOY POLITICAL LIBERTY BY?
4)ADVANTAGE OF RAIN WATER HARVESTING IS?

Naveen said...

1 fly ash is Organic particulate matter
2 injection of weakened microbes to confer resistance to a disease is known vaccination
3 advantage of rain water harvesting reduces floods and replenishes ground water

Anonymous said...

Ans is Copressive stress and down milling

mohit said...

As u r saying cut off for elect should be around 90...but mech paper was comparatively easier so combined cut off may reach near to 95

hiren said...

from 2008 onwards , only once the cutoff for paper 1 of ele/ mech was around 100. that to because of very less number of vacancy. this time...........

Anonymous said...

yes u rright upper person answer is wrong

mountking said...

dekho bhaio tum sb pta nahi ko.sa estimation lga rahe ho .....
is bar no. of vacancies for mech & elect jyada hongi vo bhi km se km 200 and agr jyada students ne paper diya hoga to cutoff km hogi aur ha mech ka paper 1 kon kh raha h ki easy tha ye na easy tha na hard aur paper 2 was no doubt very lengthy tha mujh se sirf 180 no ke question attepmt hue jbki mujhe km se km 4 se 5 que aur aate the......

in sb kardo ko dekhte hue ye proof hota h ki cutoff pichli bar se km hoga....
I think for mech gen cat. it will be
paper 1 :- 85-93
paper 2:- 125-130

Anonymous said...

Guys please share the ans key of reasoning part of 777TG8 series...

Anonymous said...

Q-111 If two shafts of the same length, one of which is hollow, transmit equal torques and have equal maximum stress, then they should have equal
a. Polar moment of inertia
b. Polar modulus
c. Dia.
d. Angle of twist

mohit said...

Ans should be b...polar modulus

mohit said...

@mountking how can u say dat dis tym 200 vacancies are more..last tym ssc had advertised 300 vacancies for mech/elec,,but they filled 600 vacancies at the end...due to massive recruitment in MES.....I doubt if such huge vacancies in MES r possible again...so no. Of vacancies may decrease also

naveen said...

ans B polar modulus

Anonymous said...

Ssc me is baar sirf mechanical ka recruitment hoga.ee aur civil ka vaccancy last year ke candidate se fill karne ke baad hamari baari aaygi. Kyunki ye court ka decision hai. Last time ka vaccancy khali tha aur use fill nahi kiya gya tha to is par case ho gya tha.

mohit said...

@naveen how much u r expecting in paper 1 nd 2....

Anonymous said...

PLEASE TELL ME WHAT WILL BE THE CUT OFF FOR EE(GENERAL)?
IS THERE ANY PART MARKING IN 2ND PAPER NUMERICALS?

Anonymous said...

95 se jyada nahin hoga in elec

Anonymous said...

C.dia should be the ans of q-111

naveen said...

expctng 105 in paper I & 140 in paperII. i am obc candidate.

mountking said...

they did not adverties any vacancies in any year they jst conduct papers and at last they told that these no of vacancies was filled .
and in last year they did not take any mech engg in mes or cwc. if you dont know then go to ssc.site and look final result of j.en 2012 there is a breif ans of ur question ....
and this time they are going to recruit mech engg in mes and cwc.so no of vacancies will more

Anonymous said...

koi mech ka 777TG8 wala hai???....answer check krte hai

Anonymous said...

esa b to ho sakta hai k is bar b koi mech engg ko na le mes & cwc wale!!!!!!!

Anonymous said...

please tell me,is there any part marking for second paper numericals?

mohit said...

@mountking. Bro u r wrong..check write up carefully...cpwd(elect) and MES (E&M) are names of posts...but for these two both mech and elect cand r eligible...last tym after paper 2 out of total 1083 selected cand around 738 were mech cand nd 345 were elect cand..last year dere was massive recruitment of mech engg in MES...hope d trend continuous

mohit said...

Yup I heard from a cand dat dere is step wise marking...I also did calculation mistake in pressure measurement numerical...but numerical itself was of 3 lines...don't knw what I will get

Anonymous said...

ITS ANSWER WILL BE D) ANGLE OF TWIST

Anonymous said...

same here dear i also done calculation mistake in pressure calculation related numerical i dont think they will give more than 2-3 marks in that bquestion what do u say mohit???

mohit said...

Yes bcoz dat numerical was of 2-3 lines only....but checker should award marks to cand for d concept also...I have drawn d same diagram also...sochecker should award atleast 5 marks

Anonymous said...

lets see and pray to god how much u have attemted in paper 2 by the way?????????????

Anonymous said...

answer is (b) polar modulus of sectionn..

mohit said...

220 marks correct portion...overall attempt 270 marks.. but i did not explain diagram quest much...i have just drawn diagrams ...i have been trying from last 2 years..so dis exam is my only hope...last year also I could not clear paper 2 cut off and got only 105 marks in paper 2

hiren said...

@ mohit last time how much you have attemped in paper 2? can u please tell me in detail?

mohit said...

@hiren last year I had attempted 165 marks paper nd got 105...in which 3 numericals were right...I think thet awars 12 marks for correct numerical...my theory ans were not upto mark nd I think I got 8-10 marks for dese theory quest

mohit said...

Yar kisi ne venturimeter wala numerical solve kiya tha??? Usme meter coefficient kese use krna tha...

naveen said...

last year my frnd got 130 marks in paper 2 and he attmptd 200 marks theory qus. No numerical. I have attmptd 250 marks but 100% correct is 200+ with 3 numericals and well diagrams, so i expect 140 .

Anonymous said...

@Mohit: what is your criteria of paper attempted...what I want to know is how much one has to write in 15 marks ques in mech paper2..for theory ques..like in the theory ques from production engg.

mohit said...

Bro I don't knw much about theory quest nd dats my weak point also,....all I know is to fill atleast 1 nd half page to get around 10 marks

mohit said...

@naveen tumne koi coaching li hai??

mohit said...

Kahan gye sabhi??? Aaj koi update nhi

Anonymous said...

mech obc cut off 85-90 paper 1 n paper 2 will be 110 is correct cut off trust me guys this cut off for intv only if want final selection u have to got 250+( p1+p2)

mountking said...

discharge nikalne ke liye formule m rkhna tha

mohit said...

@mountking yar pehle bernoulli eq apply kar ke discharge = area* velocity* meter coefficient. Aise hi krna tha na yaar????

mountking said...

kaha k bernuli dal raha h tu venturimeter ka last discharge formula hi bernuli se nikla h ....usme rkhna tha formula tha.....
q= dis. coeff. multiplied by both pipe and throt area multiplied by velecity that is root 2gh upon root of( pipe area square - throat area square )
is formule m dis coeff ki value rkhni thi usse phle h ki calue nikalni thi .....
(p1-p2)/w formule se....
isme p1 aur p2 ki value de rkhi thi aur w=9810 tha.....
is thrh pura numerical solve hona tha tu pta nahi kis thrh se solve krke aaya h bhai I dont know ur method......

mohit said...

Han bhai wahi...maine basic eq se derive kiya tha..formula yaad nhi tha...aur usme p/w ki value de rakhi thi

mountking said...

ha to fir yahi tha aur ab smjh aa gya kya tere ko ki discharge coefficiet kaha use krna tha.....?

mohit said...

Han 22 bas yahi confusion tha k meter coefficient discharge coefficient hi hai ya nhi...aur kitne marks expect kar rhe ho....SAIL ka paper de rahe ho???

mountking said...

aur ha tu kh raha h ki pressure measurement neumerical was of three lines that was also not correct
us neumerical m two measurement kraye h vo h.....
1- pressure in terms of water
2-pressure in N/meter square....
so it is also not of two or three line neumerical it consume 1 and half page almost......
in both measurment of pressure...ok so it was also a healthy neumerical.....


Anonymous said...

Are bhai logo ab to answer key lagao...
..
Baccho ki jaan loge kya ab????

Answer key ko itana time laga rahe ho to result lagane me kya 10 saal loge???

Anonymous said...

Sir apko pressure head given tha i.e p1/w given
pressure nhi jo apko w 9810 lena hai
yahan apko sidha values subtract karni thi ok

mountking said...

koi expect nahi kr raha yar select ho gya to ok vrna tata bye bye ....
sale ka nahi de raha....

mountking said...

yar ab to kr diya ab kya kru ....
baps copy mil skti h kya correct krne ke liye..???
:) :) :) (ha ha ha )
chlo koi nahi ho jati h mistake sbse hoti h hm se bhi ho gyi vesr bhi usse ans pr koi khas frk nahi pdega aur examner jyada se jyada 1 ya fir do marks kat dega ....doesn't matter...

Anonymous said...

this yr key may not come.diresct result aeyga

Anonymous said...

souring of milk to curd is an example of??????????????
what will be its answer????????????

Anonymous said...

keys k bina result nai aa sakta ...

Anonymous said...

yaar hum sab itna negative kyon sochte hain.i know ki exams me man me kafi negativa thoughts aate hain but kahi na kahi positiveness bhi jaruri hai yaar.ye lecture main isliye de raha hun kyunki sbhi keh rhe hain ki cut off is baar badhega.hum ye bhi to soch sakte hain na ki is baar cut off kam ho jayega.BE POSITIVE YAAR SAB ACHA HOGA.SABKA SELECTION HO JAYEGA.KHUD PAR AUR BHAGWAN PAR TRUST RAKHO.OK.
AAKASH

Anonymous said...

aisa koi exam batao jisme ssc ne 1 mahine baad key nikali ho even cgl ka key 1 mahine ke andar aa gya.
@ Anonymous
fermentation hai answer curd ka

Anonymous said...

Yes its possible...kyuki CGL ke ilawa aur kisi v exam ki ( FCI, MTS) ans key nhi aayi...so result aug ke first week tak declare ho jana chahiye

Anonymous said...

Last ssc chief was an awesome man....he answers every single query of students on twitter..hats off to him...

Anonymous said...

Assertion (A):
The preferred cross section of a beam subjected to transverse loading is I section.
Reason(R):
Section modulus of I section is low

ANSWER ????

mohit said...

Assertion is right...reason is wrong

Anonymous said...

Mechanical Expected cutoff 2013 Paper 1 Gen-87-91, OBC 79-82
Paper 2- Gen- 142, OBC- 109-115,other category nearly same as in 2012

Paper-1 Some time consuming than 2012 paper 1 i.e General Apptitude part, Technical was of similar level

Paper 2 easy to score 140-150 marks if some one has prepared the topics which was asked in 2012 paper

Noni Nonu said...

hello frndzz.. one of my frnd of frnd who is in cpwd told me that no. of candidates doesn't affect the cutoff too much .. it can increase or decrease by 5 marks..

keetarp atpug said...

hi , my attemptation in paper 2 is 210 out of which i m sure of 180 is right , how much i wil expect plzzz help

naveen said...

kafi chitchat ho gayi....jisko bhi correct answer janna hai...question puch lo...fir khud hi marks measure kar lena

Mohan kumar manglam said...

the characteristic feature of democratic socialization is

Mohan kumar manglam said...

please send me answer of charesteristic of democratic socialism

Anonymous said...

when ans key will be declared

Anonymous said...

yet no answer key after one month then when will be result of paper 1

Anonymous said...

Cutoff will be nearly same Best wishes and keep hope for a successful result

«Oldest ‹Older   1 – 200 of 437   Newer› Newest»

Post a Comment

Asks your Question here..our Expert will reply you with complete details.